Nickel 200 vs Nickel 201: Understanding The Difference

On This Page

Table of Contents

Choosing between Nickel 200 and Nickel 201 depends mainly on their carbon content and the temperature conditions they will face in service. One number separates them, and that number decides whether a component survives years of caustic service or embrittles within months. Getting the grade right matters wherever corrosive media meet elevated temperatures, because the wrong choice fails quietly and late.

What Is Nickel 200?

Nickel 200 (UNS N02200, W.Nr. 2.4066) is a commercially pure nickel grade valued for ductility, electrical and thermal conductivity, and strong resistance to caustic and alkaline media. Its composition runs 99.0 percent nickel minimum with carbon capped at 0.15 percent.

Those properties put Nickel Alloy 200 into electronic components, food processing equipment, and caustic handling systems, where the purity of the metal protects the purity of the product. For prolonged exposure to temperatures above about 315°C (600°F), Nickel 201 is generally preferred because its lower carbon content reduces the risk of graphitization. We at Zhejiang Xintongda Special Steel Manufacturing Co., Ltd. flag that ceiling on every enquiry, because it is the single most common specification error we see on nickel orders.

What Is Nickel 201?

Nickel 201 (UNS N02201, W.Nr. 2.4068) is the low-carbon version of Nickel 200, with carbon held to 0.02 percent maximum. That reduction exists for one reason. Above 315°C, carbon in nickel precipitates as graphite at the grain boundaries, and the resulting graphitization embrittles the metal during long exposure. Cut the carbon and the mechanism loses its fuel.

Nickel Alloy 201 therefore takes over wherever caustic service runs hot. Caustic evaporators are the classic case, operating well above the 315°C line for sustained periods where Nickel 200 would progressively lose toughness.

Key Differences Between Nickel 200 and Nickel 201

PropertyNickel 200Nickel 201
Nickel content99.0% min99.0% min
Carbon max0.15%0.02%
Service temperatureBelow 315°C (600°F)Above 315°C (600°F)
Strength and work-hardeningHigher strength, higher work-hardening rateSlightly lower strength, lower work-hardening rate
Typical useElectronics, food processing, ambient caustic handlingCaustic evaporators, high-temperature caustic service

The primary distinction between the grades rests on carbon content, directly dictating their physical and structural behavior. High-temperature performance favors Nickel 201 above 315°C to prevent graphite embrittlement, while mechanical properties give Nickel 200 higher yield strength in lower-temperature applications. Both deliver identical Corrosion Resistance across caustic media, making operational temperature and ductility the main selection factors.

Nickel 200 and Nickel 201 Specifications

Nickel 200 and Nickel 201 are covered by the same ASTM product specifications for several product forms, with the applicable standard determined by the form supplied.

  • ASTM B160 for rod and bar
  • ASTM B161 for seamless pipe and tube
  • ASTM B162 for plate, sheet and strip
  • Matching ASME SB numbers for each of the above

Material frequently arrives dual-certified as Nickel 200/201, meaning a single heat meets both chemistries at once because its carbon sits at or below 0.02 percent. Dual certification simplifies stocking and gives a fabricator one material that covers both temperature bands. It does not remove the buyer’s responsibility, though. Confirm the grade, the specification and the product form on the purchase order so the certificate matches what the design actually requires, and check that the certificate states both UNS numbers if the project relies on the dual status.

Industrial Applications of Nickel 200 and Nickel 201

Commercially pure nickel grades offer strong resistance to caustic and alkaline environments, making Nickel 200 and Nickel 201 useful in chemical processing and other applications where corrosion resistance and material purity are important.

  • Caustic Handling Systems: Utilized for the storage and transfer of sodium hydroxide, with Nickel 201 specified for evaporators running above 315°C to prevent graphitization.
  • Chemical Processing Equipment: Applied in reactors and piping handling neutral salts and organic chemicals, selecting Nickel 200 or Nickel 201 based strictly on operational temperatures.
  • Food Processing Infrastructure: Leveraged for its high purity to prevent metal contamination and preserve product integrity throughout processing lines.
  • Electronics and Electroplating: Specified for high-conductivity electrical and thermal components where precise physical properties drive performance.
  • Heat Exchangers and Pressure Vessels: Divided by temperature thresholds, running Nickel 200 below 315°C and switching to Nickel 201 for elevated thermal service.
  • Synthetic Fibre Production: Deployed where exposure to hot, concentrated caustic media demands clean, uncontaminated metal surfaces.

How to Choose Between Nickel 200 and Nickel 201

Start with the maximum operating temperature and how long the part stays there, using 315°C (600°F) as the deciding point. Sustained exposure above that line points to Nickel 201 regardless of other factors.

Then work through the rest. Evaluate the chemical environment, its concentration, and its temperature together, since acid service behaves differently from caustic. Confirm the product form, dimensions, and material condition you need. Verify the applicable ASTM specification and demand material test certificates against it. Factor in cold forming and welding, since Nickel 201 forms more readily and needs fewer intermediate anneals on deep draws. These checks are what turn a general preference for corrosion-resistant nickel alloys into a grade our customers can rely on in-service, and at XTD we quote against that full set rather than the grade name alone.

Conclusion

Carbon content is the key difference between Nickel 200 and Nickel 201. Nickel 201’s 0.02 percent maximum resists graphitization and makes it the grade for service above 315°C (600°F), while Nickel 200 suits lower-temperature duty at a lower cost. Both serve chemical processing, caustic handling, food equipment and electronics, and the operating conditions decide which belongs in the system.

Zhejiang Xintongda Special Steel Manufacturing Co., Ltd. is a dedicated manufacturer of high-performance stainless steel seamless pipes and tubes with over a decade of engineering expertise. Our manufacturing capabilities focus on austenitic stainless steels, duplex and super duplex grades, as well as advanced nickel alloys designed for critical and high-integrity applications. With a strong emphasis on metallurgical precision, process stability, and full traceability, Xintongda delivers seamless pipe solutions engineered to perform reliably in high-pressure, high-temperature, and corrosive environments worldwide.

Catalogue Phone E-mail Whatsapp