Grade |
C |
Mn |
P |
S |
Si |
Cr |
Ni |
Mo |
N |
Other |
316 |
≤0.08 |
≤2.00 |
≤0.045 |
≤0.03 |
≤1.00 |
16.00-18.00 |
10.00-14.00 |
2.00-3.00 |
– |
– |
316L |
≤0.035 |
≤2.00 |
≤0.045 |
≤0.03 |
≤1.00 |
16.00-18.00 |
10.00-14.00 |
2.00-3.00 |
– |
– |
316H |
0.04-0.10 |
≤2.00 |
≤0.045 |
≤0.03 |
≤1.00 |
16.00-18.00 |
11.00-14.00 |
2.00-3.00 |
– |
– |
316Ti |
≤0.08 |
≤2.00 |
≤0.045 |
≤0.03 |
≤1.00 |
16.00-18.00 |
10.00-14.00 |
2.00-3.00 |
≤0.10 |
Ti:5×(C%+N)-0.7 |
316N |
≤0.08 |
≤2.00 |
≤0.045 |
≤0.03 |
≤1.00 |
16.00-18.00 |
11.00-13.00 |
2.00-3.00 |
0.10-0.16 |
– |
316LN |
≤0.035 |
≤2.00 |
≤0.045 |
≤0.03 |
≤1.00 |
16.00-18.00 |
11.00-13.00 |
2.00-2.50 |
0.10-0.16 |
– |
Chemical Composition
Mechanical Properties
Grade |
Tensile Strength ksi(MPa) |
Yield Strength ksi(MPa) |
Elongation,% |
Hardness Brinell/Vickers |
Hardness Rockwell |
316 |
≥75(515) |
≥30(205) |
≥35 |
≤192HBW/200HV |
≤90HRB |
316L |
≥70(485) |
≥25(170) |
≥35 |
≤192HBW/200HV |
≤90HRB |
316H |
≥75(515) |
≥30(205) |
≥35 |
≤192HBW/200HV |
≤90HRB |
316Ti |
≥75(515) |
≥30(205) |
≥35 |
≤192HBW/200HV |
≤90HRB |
316N |
≥80(550) |
≥35(240) |
≥35 |
≤192HBW/200HV |
≤90HRB |
Applications
- Food processing equipment Brewery equipment,
- Chemical and petrochemical equipment,
- Laboratory benches and equipment
- Beach deck coverings,
- Shoreline covers,
- Boat fasteners,
- Chemical containers,
- Heat exchangers,
- Mining sieve,
- Springs,
- Medical implants.
Testing
- EN 10204/3.1B, EN 10204 3.1 and EN 10204 3.2 Material Test Certificates (MTC)
- Raw Materials Certificate
- 100% Radiography Test Report
- 100% PMI
- Heat Treatment Charts
- Third Party Inspection Report
- Surface roughness and size measurement
- Manufacturer Test Certificate( Impact Testing, Flatten, Spin,Curve, Hardness, Intergranular ,Point corrosions, Grain size, ET,UT, HT...)
- Laboratory Test Certificate from Govt. Approved Lab
- ......
End of Pipe and Tube
- BE : Beveled end
- BBE : Bevel both ends
- BLE : Bevel large end
- BSE : Bevel small end
- TOE / POE = Treaded One End / Plain One End
- TOE / BOE = Treaded One End / Beveled One End
- POE / BOE = Plain One End / Beveled One End
- TBE = Treaded Both Ends
- PBE = Plain Both Ends
Packing
- Ply Wooden Boxes
- PE Fabric Bundles
- Standard seaworthy export packing
- Plastic Bags, or as required
Marking
- Supplier / Manufacturer Name or Custom Logo - on request
- Specification
- Material Grade
- Nominal Size
- Schedule or Wall Thickness
- Method of Manufacturing (Seamless or Welded)
- Heat Number
Marked Pipe Sample: XTD ASTM A312 TP316Ti SEAMLESS 42.2x 3.56*6000MM HEAT NO. 2023121205A15
Material Summary
TP316Ti /1.4571/UNSS31635, is a titanium-stabilized, molybdenum-alloyed austenitic chromium-nickel steel with improved machinability has similar characteristics to AISI 316L, but the TP 316Ti has better mechanical properties and strength at high temperatures. TP 316Ti (1.4571, UNS S31635) due to the addition of titanium shows higher corrosion resistance.
TP 316Ti (1.4571, UNS S31635) is generally considered but is not resistant to hot sea water. Hot chloride environments may cause pitting and crevice corrosion. TP 316Ti (1.4571, UNS S31635) HEAT RESISTANCE 316 exhibits good resistance to oxidation in continuous service to a temperature of 870 ° C and a temperature of 925 ° C. However, if corrosion resistance to water is required, continuous use at 425-860 ° C is not recommended. In this case, 316L is recommended due to resistance to carbide precipitation. When high temperatures are required at temperatures above 500 ° C, class 316H is recommended.